The
Following Products are Shipped to your Address
This book includes fully-illustrated, easy-to-follow
instructions covering every step of building a Pinewood Derby car and
making it fast. Both beginners and experienced racers will find this
book very useful.
Includes instructions for building the "ultimate" car.
This book includes:
Detailed instructions to build the High-Wing Racer,
Stock Car and Vintage Race Car.
Templates and instructions for five advanced designs
Templates for 24 other car designs
Techniques for creating custom decals and applying a high-quality
finish
Helpful tips for preparing the car's wheels, axles, and weight.
This video goes into the details of how to make an
ultimate Pinewood Derby car. Watch what works and learn why. You can
put these advanced techniques to work in your car.
Every aspect is covered including body design, weight
placement, axle modifications, wheel tuning, alignment and testing.
Family Fun that Every Mom, Dad,
Down and Derby is a fun family comedy
about a cub scout Pinewood Derby race that turns an average group of
dads into an awkward bunch of competitors.
Polished
Axles -- The Winning Edge Four
styles
to choose from All of these axles are machine polished
to a very fine mirror finish
Official
BSA axles
Polished to a mirror finish
Legal in all races
Polished
Axles (4
axles per set)
$13.95
Official BSA axles
Polished to a mirror finish
Friction reducer groove
Legal in most races
Polished
Grooved Axles (4
axles per set)
$15.95
sets
This high quality stainless steel axle is machined perfect then polished
to a mirror finish. Looks
very similar to the official BSA axles.
Speed Axles (4 axles per set)
$12.95
This high quality stainless steel axle is machined perfect then polished
to a mirror finish. Includes a friction reducer groove. Looks
very similar to the official BSA axles.
Super Speed Axles w/grooves (4 axles per set)
$13.95
Same
as above but with graphite coating.
Outside of axle head is not coated
Polished Axles (4
axles per set)
$16.95
Same
as above but with graphite coating.
Outside of axle head is not coated
Polished Grooved Axles (4
axles per set)
$18.95
Same
as above but with graphite coating.
Outside of axle head is not coated
Speed Axles graphite coated (4 axles per set)
$15.95
Same
as above but with graphite coating.
Outside of axle head is not coated
Super Speed Axles w/grooves graphite coated (4 axles per set)
$16.95
OUR FASTEST AXLE!
Weights The heavier your car is, the faster it
will go. Bring your car up to the 5 oz maximum with our weights. Most cars require 2 to 4 oz of additional weight.
Wire Weights Can be easily cut to any length These are lead weights and
$3.95
These 1/4" diameter lead
weights can be easily cut with wire cutters, diagonal pliers or other
cutting tools. These weights can be inserted into the bottom, back
or side of your car.
A 5/16" drill bit is required to drill the holes in your
car block.
5/16" Drill Bit For use with Wire Weights
$2.95
Barrel
Weights 1/4 oz weights in six segments
$3.95
Order
Barrel weights
are inserted into the back or bottom of your Pinewood Derby car. Just
drill a hole in the back of the block, break off the exact amount of
weight you need and slide them in. A 3/8" drill bit is required to
drill the holes in your car block.
3/8" Drill Bit
$2.95
Fits any 1/4" or larger drill
Stick-On
Weights These are lead weights and
$3.95
Order
Stick-on weights are easily
applied anywhere on your Pinewood Derby car. Just peel off the backing
and stick them on. This set comes in 12 convenient .25 oz segments.
Coin Pockets
$1.95
Order
These coin pockets have a self adhesive
back that easily attaches anywhere on your car. Each pocket securely
holds one coin. Add coins until your car reaches the 5 oz limit.
Tungsten
Weights Tungsten is more dense than lead and is
completely safe to handle.The higher density allows you to put more weight
in the back of your car where it does the most good.
The first three weights on this list are sold in .5 oz increments
so you can mix and match to get the combination that is right for you.
Tungsten Plate Each plate is .5 oz
$2.95 for
each .5 oz plate
Order
These Tungsten plates are mounted
on the bottom of your car with the included screw. Most cars have room
for up to 12 plates.
Tungsten Cylinder Each cylinder is .5 oz
$2.95 for
each .5 oz cylinder
Order
Cylinders are typically inserted
in your car by drilling a 3/8" hole in the back, bottom or side
of the car then the hole is sealed with wood putty.
3/8" Drill Bit
$2.95
Fits any 1/4" or larger drill
Tungsten Squares Four .13 oz weights
$2.95 for 4 .13 oz
squares
Order
Our Tungsten Squares are usually
glued on the top or sides of the car. They only weigh .13 oz each so
they are great for fine tuning your car's weight. One end of each square
is tapered to help the squares match the design of your car.
Tungsten Cubes Seven .07 oz weights
$2.95 for seven .07
oz Cubes
OUT
OF STOCK
These small tungsten cubes are
ideal for fine tuning your car's weight and they fit in tight spaces.
Glue them into a slot under your car or pack them into a 9/32" or
larger hole.
Tungsten Putty 1 oz
$5.95 for
1 oz.
Order
This putty is great for fine-tuning
the weight of your car. It can be easily molded into almost any
shape. Pinch off a piece and press the putty into a hole in the car.
Tungsten Disc Dimension: 1 1/8" diameter
X 1/4" high
$19.95 for 3 oz
Order
Ideal for "light" cars where you
want the weight added to one area.
Easy to use. Epoxy to the top of the car or drill a 1 1/8" hole
and glue it into the hole.
1 1/8" Forstner Bit For drilling holes
for our Tungsten Disc
$4.95
Order
Easily drill a flat bottomed 1
1/8" hole
in wood.
Also works great for removing wood from the bottom of your car.
Pro
Tools for your Pinewood Derby Car
The axles
that come with your car kit are NAILS! They are not straight and this
is why we created the Pro-Axle Press. All you need is a hammer and
the Pro-Axle Press to straighten and make the shaft round and square
and taper the head of the axle. You can also use the Pro-Axle Press
to purposely bend an axle (to raise a front wheel or make an alignment
adjustment).
The Pro Rail Rider is used with the Pro Axle
Press to align your car to run straight or to tune it to use the new "Rail
Riding" technique for even faster speed. Full instructions included.
The Pro-Body tool is a precision-machined
device that will improve the speed of your Pinewood Derby cars through
accurate axle hole drilling. The Pro-Body Tool:
Ensures accurate axle positioning by allowing you
to drill accurate axle guide holes into the existing axle slots with
a hand drill! The guide holes ensure that the axles are mounted square
and true on the car. Improved axle mounting accuracy equals greater
speed!
For races which allow axle holes, the Pro-Body
tool serves as a guide for drilling accurate holes with a hand drill.
Again, improved axle mounting accuracy equals greater speed!
The Pro Body Jig is an
adjustable tool designed to create new axle holes in a Pinewood Derby
car block.
Adjustable for standard, extended or custom axle spacing.
Accurate axle holes every time.
Can also be used to drill a raised wheel.
#44 drill bit included
A hand drill is needed to use this tool.
Pro-Hub Tool Sandpaper included
$9.95
The Pro-Hub tool performs three
important wheel improvements:
Hub Squaring - Ensures accurate rotation by squaring
the wheel hub to the wheel bore.
Hub Coning - Reduces friction by accurately and
easily coning the inside wheel hub.
Bore Reaming - Some wheels are manufactured with
a wheel bore that is too small to fit a wheel mandrel. This tool
ensures proper axle fit by reaming undersized wheel bores.
Pro-Wheel
Shaver XT and Pro-Hub Tool $47.95 Order
Pro-Wheel Shaver XT (Pro-Hub Tool Required) $39.95 Order
Replacement Shaver Blade $3.60
Shave Time Off
Of Your Pinewood Derby Runs Now with
with Screw-adjustable Blade Depth!
Not all wheels are created equal, but with a Pro
Wheel Shaver, they can be made Hi-Performance.
Out of round wheels cause improper alignment at speed - slowing your car
down. This tool will help you make your wheels round, trim off imperfections
and reduce the contact area between the wheel and car body.
(The Pro-Hub tool is required to use the Pro-Wheel
Shaver).
Pro-Hub
Shaver and Pro-Hub Tool $15.95 Order
Pro-Hub Shaver (Pro-Hub Tool Required) $6.95 Order
The Pro-Hub shaver reduces friction between the axle head and wheel by:
Removes excess plastic remaining around the wheel's outer hub after the molding process.
Squares the outer hub with the wheel bore creating a smooth surface.
Removes the hub step on the new style wheels.
(The Pro-Hub tool is required to use the Pro-Hub
Shaver).
Pro-Wheel Mandrel
$8.95
The easiest way to make your Pinewood
Derby car wheels perfectly round and smooth is to mount each wheel
on our mandrel then use a drill to spin the wheel while holding it
lightly against a sandpaper block. Benefits include:
Centering cone provides perfect wheel centering
on the mandrel.
Step cut allows for reverse mounting of the wheel
(for polishing the inner edge.
Easy to grip screw does not require tools to mount
the wheels.
Pro-Bore Polisher
$9.95
The Pro-Bore Polisher will improve the speed of
your car by reducing friction inside the wheel bore.
Eliminates plastic debris and minimizes flaws inside the wheel
bore
Polishes the wheel bore to a high shine
Wheel Edge Polisher
$9.95
Smooth and polish the often overlooked wheel edge
for extra speed.
Works for BSA, Pinecar, and Awana Wheels.
Wheel Edge Polisher Refill
$2.95
Extra sandpaper for your Wheel Edge Polisher.
Axle-Installer
$5.95 Order
If your Pinewood car uses slots
for the axles, our Axle Installer is for you! It makes it very
easy to insert the axles into the slot at the right depth and height
and makes sure that the axle is horizontal.
For use on cars that use 4 axles mounted in slots.
Axle Puller
$14.95
Our axle puller is
the easy way to remove axles from your car without damaging the axle
or the wheel.
Feeler Gauge
$2.95
This
stainless steel feeler gauge is ideal for
setting correct distance between the wheel hub and car.
Wheel Gauge
$47.95
Your car will run
faster if the wheels are round. This gauge checks wheel roundness
to within .001".
Works on BSA, PineCar and Awana wheels.
Wheel Alignment Tool
$4.95
Get your car up to spec. Use this tool to:
Check Axle Alignment
Check Clearance Between Wheel and Body
Prevent Wheel Camber
Check Toe-in and Toe-out
Check Car Length and Width
Check Track Clearance
Easy to follow instructions included.
Coping Saw This saw is just the right size to shape your car
$9.95 Includes one blade Order
Coping Saw Replacement
Blades
$1.95 for a kit of 4 bladesOrder
This
rasp is used to shape the block after it has been cut with a saw.
Rasps are also great for rounding sharp corners and cutting groves
into the wood. Rasps have rough teeth that can quickly remove a lot
of wood. After you use a rasp, a file or sandpaper can be used to
smooth the block.
Mobile Garage Kit Now you can safely transport and display your Pinewood
Derby Car
$19.95 Order
Car Inspection Box Fast car inspection for:
Car dimensions
Underbody clearance
Wheelbase checking
Start Pin checking
OUT
OF STOCK
Car not included
Display Stand Easy to assemble
$6.45 Order
Practice Track Each set includes five 2 ft. sections
for a total of 10 ft. single lane
Order more than one set for longer runs or additional
lanes.
$19.95
Practice Track Brake Attaches to the end of the practice
track to safely stop your car.
One brake needed for each lane.
$12.95
Designed to
be used with our Practice Track
Great for tuning your
car or holding your own races
Accurate timing to 0.001 second
Optical operation - no moving parts
Single Lane Track Timer Two Lane Track Timer
view
shopping cart 
home 
